In fact, there is no big difference between electrical equipment containers and ordinary containers. Due to the needs of certain commodities, different design schemes and modifications have been made to the structure of containers and mechanical equipment. Due to the different goods transported, there are many classifications of electrical equipment containers. Next, introduce the types and precautions of electrical equipment containers:

Types of 1. electrical equipment containers

1. Open-top electrical container

It is a container without a top. When loading, unloading and transferring goods, heavy goods should be loaded or unloaded into containers from the top using lifting equipment. This type of container is suitable for loading glass, steel products, wood-based panels, industrial equipment and other very high-quality goods, heavy goods whose outer walls can be fixed, and goods that cannot be loaded, unloaded and transferred from the tailgate but need to be loaded, unloaded and transferred from the top of the container.

2. Architecture of electrical container

It is an electrical equipment container that can be unloaded. It does not have the top, walls and end walls of the container, leaving only the bottom box and corner posts to carry the goods. The key to containers such as power containers is to use discomfort to load large objects, overloaded parts, light foam goods, heavy machinery, stainless steel plates, seamless steel pipe machinery and equipment, etc. In general storage containers or open-top containers, heavy goods, excessive goods, goods that are not afraid of being trapped by wind and rain, and goods that need to be loaded from the top or side of the box, need to be fixed in the box.

3. Electrical container of bulk scale

Container for loading soybean, rice, maltose, wheat flour, refined feed and its concrete, epoxy resin, borax, chemical raw materials and other bulk weighing powder particle cargo. For some goods that require phytosanitary inspection, such as imported grain, fumigation and disinfection need to be carried out in the harbor tank outside the port. Capital investment openings for fumigation drugs can be set on bulk containers, as well as the import and export of fumigation steam, and it can also be stipulated that during fumigation Such containers should be completely sealed.

4. Tank type electrical container

Suitable for loading liquor, raw oil, chemicals, dangerous goods and other liquid cargo containers. Such containers have a common structure and mechanical equipment suitable for loading such goods. When loading, the goods enter through the loading hole at the top of the tank; when loading and unloading the goods, the goods are discharged from the bottom unloading hole through the action of force, or sucked out from the top loading port.

Precautions for 2. electrical equipment containers

1, pay attention to fire prevention. Since the electrical room composed of containers is mainly made of foam color steel plates, in order to avoid accidental fire attacks during use, strict fire prevention measures should be taken. Not only is it forbidden to carry out electric welding construction near the walls of the container board house, but also in the cold winter season. Install fire protection equipment. In order to perform waterproof treatment in certain needs, it is also forbidden to use blowtorch on house materials. When laying indoor lines, choose grounding or refractory pipes

(2) Fixed on the ground. Since the color steel plate used in the electrical equipment container is lighter than the full steel structure, in order to avoid the dangerous situation caused by the wind, the equipment fixed at the bottom should be selected, so as to enhance the wind resistance and reduce the damage to the house caused by natural disasters such as typhoons.